A circular saw is one of those "must have" tools for most homeowners and for every do-it-yourselfer. It will save you a lot time and effort and easily handle cutting projects that you wouldn't want to tackle with a hand saw. The Makita BSS610 is one of the most highly regarded of the cordless circular saws. Here are a few tips and reminders on using this saw.
1. When cutting small wood pieces be sure and secure them (e.g., with clamps) to the saw horse or other cutting support that you are using before you begin cutting. This will help you make a straighter and safer cut.
8 1 4 Saw Blade
2. If your saw blade begins to bind (or if you are stopping your saw in the middle of a cut for any reason), release the saw's trigger and do not attempt to remove the saw until the blade has completely stopped moving. If you try and remove the saw before the blade has completely stopped, a saw "kickback" may occur.
3. Keep your saw's blade clean. You can use kerosene, gum remover, or hot water to clean the blade. Never use gasoline! IMPORTANT: Make sure that you have removed the battery from the saw before beginning to remove and clean the saw blade.
4. A circular saw is designed to cut only in a straight line. If you try cutting in other than a straight line, the saw blade will bind or possibly cause a "kickback". Borrow a jig saw, if you need to perform curved cutting.
5. When cutting large wood sheets (e.g., 4' X 8' pieces of plywood), make sure that the wood piece is fully supported so there will be no sag in the wood sheet during your cut. If the wood piece is allowed to sag, your saw will almost certainly bind.
6. Always cut with both hands firmly grasping the saw - one hand on the front grip and one hand on the rear handle.
7. Always remove the battery from the saw before changing a saw blade. After you have removed the old blade (and before installing the new blade), make use of the opportunity to clean out the sawdust and other cutting debris from the upper and lower blade guards. Sawdust/debris has a tendency to accumulate in those two places. Also, when putting on the new saw blade, make sure that the blade's teeth are pointed toward the front of the saw.
8. Like with any saw, never force the cut. Let the saw do the work! Slowly push the circular saw forward as the saw blade cuts the wood.
9. It is prudent to wear a dust mask, ear protection, and safety glasses whenever you are using a circular saw.
10. When adjusting the depth of the saw's cut, set the cut depth so that only a single tooth of the blade is showing below the piece of wood you are cutting.
I hope these tips and reminders will help!
Special Price!!! Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating
Click for larger image and other views
Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature
- 10-inch 80T ultra fine finish cut-off blade with a laser-cut 5/8-inch arbor
- Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
- Heat expansion slots let blade expand due to heat build-up; durable micrograin titanium carbide
- Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Laser cut arbor for accurate blade rotation reducing vibration and premature wear
Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Overview
FREUD SAW BLADE *10" *80T *5/8" arbor *Ultra finish cut *Super thin laser cut kerf *"Red" Perma-Shield coated *Laser cut stabilizer vents *Laser cut heat expansion slotsFreud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Specifications
For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips. |
 |
|
Achieving premium results when creating finish crosscuts in ultra-fine materials is all about clean, accurate cuts. The Freud D1080X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.
Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making ultra-fine finish crosscuts in delicate pieces. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.
Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1080X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 80 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.
An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.
Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1080X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.
Fits Miter and Table Saws
The Freud D1080X is a great addition to your workshop because it's designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.
This product is covered by Freud's Limited Lifetime Warranty.
What's in the Box
Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade.
SAVE NOW on the special offers below!
Available In Stock. |
| This Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
