A circular saw is a great tool and one of the most common tools in the workshop. It was invented in England back in 1780. The circular saw is also known as a buzz saw or commonly called the Skil saw, even though Skil is a manufacturer that makes circular saws. With the right blade, a circular saw is capable of cutting wood, steel, masonry and ceramic tile. Circular saws come in different sizes ranging from 3" to 16". The most common corded size is 7 1/4" and cordless is 5 3/8" & 6 1/2". There are two types of circular saws: IN-Line Saws and Worm Drive Saws.
In-Line Saw - These are the most common types of circular saws and tend to be the least expensive. In addition, they don't weigh as much as the Worm Drive saws. An In-line saw's motor sits perpendicular to the blade and a shaft runs directly from the motor to drive the blade. An In-Line saw will suit most of your applications, and except for changing the blades, they are maintenance free.
8 1 4 Saw Blade
Worm Drive Saw - A worm drive is for heavy duty use and tends to cost a little more than the In-Line saws. A worm drive motor is positioned parallel with the blade and uses a gear to increase the torque transferred to the blade. These tend to be a little heavier than the in-line models. Also, worm saws are not maintenance free, you will need to occasionally add a special oil to the motor, which is nothing more than unscrewing a screw and adding the oil, it is very easy.
Circular Saw Features
Electric Brakes - This is one feature I would get, no questions asked. An electric brake stops the motor in about two seconds after releasing the trigger, while a saw without an electric brake will take about 10 to 15 seconds to stop. The electric brake works by reversing the flow of electricity to the saw motor. The reason to go with the electric brake, which most models now offer, is to save limbs and fingers. After you are cutting for a while your arm will tend to get tired, so you want to make sure your safe at all times. Stopping the blade quicker means less chances of getting hurt.
Blade Capacity - As noted above circular saws come in different blade sizes. If you are buying a corded model I would go with a 7 1/4" and for cordless, go with a 6 1/2". The larger blade models are heavier, but in the long run you will have to make less cuts, especially on angle cuts.
Shaft Locks - Make sure your saw has a lock. A Shaft lock is usually a button you press that holds the blade still, making changing the blade easier. If your buying a professional power circular saw, it should have this feature. The cheaper models usually do not have this feature.
Circular Saw Blades
A saw blade is one of the most important parts to a circular saw. Not only having the right blade is important, but also having a sharp blade is important. There are numerous blades for different jobs and below we cover the common uses. If you would like a more in depth explanation on saw blades please follow this link - Blades.
Steel Blades - Inexpensive and good for softwood. Hardwood will make steel blades dull very quickly.
Carbide Blades - Will stay sharp longer than steel blades, but more expensive.
Tile Blades - Usually have diamond tip blades and are designed especially for cutting ceramic tile.
Masonry Blades - These blades are made for cutting concrete, brick, cinder block and other masonry material. They are made of abrasive material.
What to look for when buying a circular saw
I would definitely look for a circular saw that accepts 7 1/4 blades. These are the most common blades; therefore making it easier to buy blades down the road. Also I would look for a saw with a long cord, as you would be surprised how many cords are very short. You can always add an extension cord on, but I would look for a cord that is at least 8 feet in length. Another primary item to look for is an adjustable base plate. This is good for making angle cuts and sometimes comes in very handy.
Cordless Saws - Cordless saws are nice because they have no cords to plug in, trip over or even cut through. However, they lack power. The blades tend to be smaller and therefore they do not cut as quick. Since it takes a lot of power to cut through wood, you will definitely need more than one battery as you will be recharging them often.
Corded Saws - Corded saws are more powerful, but also heavier. If you are going to be cutting a lot of wood, grab the corded model as it will save you aggravation down the road.
I currently own a cordless and corded one. I find myself using both models just about the same. It is just easier to grab the cordless one and start cutting. Most of the carpenters I know or have talked to also own both styles.
Tips on using a Circular Saw
Make sure you have the right blade for the type of material you are cutting.
Blades - Make sure your blade is sharp and not dull. Dull blades tend to heat up more which causes more wear on your tools and more chances to bind.
Set the cutting depth no more than a 1/4 inch thickness of the wood to be cut. This will help reduce the chances of kick backs.
Clamp the wood you will be cutting. This will insure a more accurate cut.
Make sure your wood is clean of nails.
Make sure your saw is up to speed before you start cutting the wood.
Don't force your saw to cut. Let the saw cut by pushing slightly into the wood and letting the saw cut.
Make sure the blade stops before you grab the wood.
Click for larger image and other views
Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor Feature
- Features Freud's Exclusive TiCo Hi-Density Carbide designed specifically for crosscutting applications
- Ultra thin kerf for fast, easy cutting and minimum waste
- Anti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness
- Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life
- Freud's Limited Lifetime Guarantee
Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor Overview
Super thin laser cut kerf (small diameter blades only) provides faster, cleaner, more exacting cuts. Perma Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact resistant to hold their edge longer. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade warp. Tri metal shock resistant brazing for stronger carbide teeth. No. D0436X: 4 3 8'' diameter, 36T, 20mm arbor No. D0516X: 5 3 8'' diameter, 16T, 10mm arbor No. D0524X: 5 3 8'' diameter, 24T, 10mm arbor No. D0536X: 5 3 8'' diameter, 36T, 10mm arbor No. D0620X: 6'' diameter, 20T, 1 2'' arbor No. D0640X: 6'' diameter, 40T, 1 2'' arbor No. D0624X: 6 1 2'' diameter, 24T, 5 8'' round and diamond knockout arbor No. D0624A: 6 1 2'' diameter, 24T, 5 8'' round and diamond knockout arbor No. D0641X: 6 1 2'' diameter, 40T, 5 8'' diamond knockout arbor No. D0724X: 7 1 4'' diameter, 24T, 5 8'' round and diamond knockout arbor No. D0724A: 7 1 4'' diameter, 24T, 5 8'' round and diamond knockout arbor No. D0724W: 7 1 4'' diameter, 24T, diamond knockout arbor only, Available Only At Woodburn, Mesquite No. D0740X: 7 1 4'' diameter, 40T, 5 8'' round and diamond knockout arbor No. D0740A: 7 1 4'' diameter, 40T, 5 8'' round and diamond knockout arbor No. D0760X: 7 1 4'' diameter, 60T, 5 8'' diamond twist out arbor No. D0760A: 7 1 4'' diameter, 60T, 5 8'' round and diamond knockout arbor No. D0824X: 8 1 4'' diameter, 24T, 5 8'' round and diamond knockout arbor No. D0840X: 8 1 4'' diameter, 40T, 5 8'' round and diamond knockout arbor No. D0860S: 8 1 2'' diameter, 60T, 5 8'' round and diamond knockout arbor No. D1024X: 10'' diameter, 24T, 5 8'' round arbor No. D1040X: 10'' diameter, 40T, 5 8'' round arbor No. D1040A: 10'' diameter, 40T, 5 8'' round arbor No. D1050X: 10'' diameter, 50T, 5 8'' round arbor No. D1060X: 10'' diameter, 60T, 5 8'' round arbor No. D1080X: 10'' diameter, 80T, 5 8'' round aFreud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor Specifications
For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D0760X Diablo 7.25-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips. |
 |
|
Achieving premium results when creating finish crosscuts in ultra-fine materials is all about clean, accurate cuts. The Freud D0760X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.
Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making ultra-fine finish crosscuts in delicate pieces. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.
Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D0760X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.59-inch kerf between the blade's 60 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.
An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.
Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D0760X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.
Fits Circular Saws
The Freud D0760X is a great addition to your workshop because it's designed with the versatility to fit a variety of circular saws.
This product is covered by Freud's Limited Lifetime Warranty.
What's in the Box
Freud D0760X Diablo 7.25-Inch Ultra-Fine-Finish Saw Blade.
SAVE NOW on the special offers below!
Available In Stock. |
| This Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
